No. The collision domain on a hub is shared throughout causing each port to listen before transmitting. A switch on the other had limits the collision domains by port therefore allowing the host to transmit at will.
----- Original Message ----- From: "Saravanan L" To: Sent: Tuesday, September 10, 2002 2:59 AM Subject: A HUB can work in Full-duplex mode? [7:52973] > Just I want to know can a Hub work in full-duplex mode? > > Saravanan > *************************************************************************** > This message is proprietary to Future Software Limited (FSL) > and is intended solely for the use of the individual to whom it > is addressed. It may contain privileged or confidential information > and should not be circulated or used for any purpose other than for > what it is intended. > > If you have received this message in error, please notify the > originator immediately. If you are not the intended recipient, > you are notified that you are strictly prohibited from using, > copying, altering, or disclosing the contents of this message. > FSL accepts no responsibility for loss or damage arising from > the use of the information transmitted by this email including > damage from virus. > *************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52979&t=52973 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
