4500 don't run from flash so upgrading it is the same as a 2600. Copy the image into flash, set your boot variable and reload.
Dave McHugh Randy wrote: > > All > I want to perform and upgrade on a 4500m and the proceedure: > > http://www.cisco.com/warp/customer/130/sw_upgrade_proc_ram.shtml > > listed on the CCO says that you dont need to go into boot rom mode to > perform the upgrade. It just shows that you do it in regular exec priveledg > mode. And also its an example of a 2600. Does anyone have any experience > with this upgrade on a 4500m ? Can you please give me any more tips and tell > me if this proceedure on the CCO is valid? > > I am upgrade from 11.3 to 12.1. I have plenty of flash and dram for the > ugrade. > thx > Randy -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53034&t=53022 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
