In my experience, 'notconnect' has always been a physical problem. Link lights can be deceiving. It only requires 1 of the 4 wires to give you a green light.
HTH Darren At 09:27 PM 9/10/2002 +0000, puro prasad wrote: >HI, >port shown as 'not connect' on the 4006 switch. The LED is green on the >switch as well as on the NIC. Tried disabling and reenabling the port. No >go. What should cause this. > >GEHYD-CT-2F1Q-4006-2 (enable) sh port 5/32 >Port Name Status Vlan Level Duplex Speed Type >----- ------------------ ---------- ---------- ------ ------ ----- >------------ > 5/32 FASTETHERNET notconnect 1 normal auto auto >10/100BaseTX > >Any suggestions >thanx +++++++++++++++++++++++++++++++++ International Network Services Darren S. Crawford - CCNP, CCDP, CISSP Sr. Network Systems Consultant Northwest Region - Sacramento Office Voicemail (916) 859-5200 x310 Pager (800) 467-1467 mailto:[EMAIL PROTECTED] +++++++++++++++++++++++++++++++++ Every Job is a Self-Portrait of the person Who Did It...Autograph Your Work With EXCELLENCE! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53037&t=53029 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
