How do I apply two different crypto maps to the same interface ???

I have two crypto maps ... bmw and ferarri  .....

However, if I apply the bmw crypto map to the oustside interface this
removes the ferarri crypto map from the outside interface .. and vice versa
...

Regards

Paul ...

----- Original Message -----
From: "Mark W. Odette II" 
To: 
Sent: Thursday, September 12, 2002 6:52 AM
Subject: RE: PIX to PIX ISAKMP Policy ... [7:53082]


> Heed the warning... That little tip came a little too late for me a
> while back and it bit me in the butt hard.  I had to wait until the next
> morning to get someone at the remote location to give the PIX the ol'
> 'boot.
>
> -Mark
>
> -----Original Message-----
> From: David Armstrong [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 11, 2002 8:55 AM
> To: [EMAIL PROTECTED]
> Subject: Re: PIX to PIX ISAKMP Policy ... [7:53082]
>
> Paul,
>
> You can have the same isakmp policy and the same crypto ipsec
> transform-set
> for all of your ipsec vpn's but will need to define a new crypto map and
> access-list. Remember to run isakmp disable outside BEFORE making
> configuration changes to your interface or you could lock up the PIX.
>
> David Armstrong
>
> ""Paul""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi ..
> >
> > I have setup site to site from a 506 to a 515  .... this all works
> fine
> ...
> > I now want to set up another site site from a 501 to the same 515 ...
> >
> > When doing so ... can I use the same ISAKMP policy that I already
> created
> on
> > the 515 PIX ???
> > If so ... do I just add another 'ISAKMP key **** address' line ???
> >
> > I guess that I would have to create another 'crypto ipsec
> transform-set'
> !!
> >
> > Has anyone done anything similiar to this ????
> >
> > Regards
> >
> > Paul ...




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53190&t=53082
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to