HI All,
Got a strange problem on a 3524xl switch.
Problem: Need to create 2 VLANS . I issue the statements
interface vlan 1
ip address 10.64.18.250 255.255.255.0
no shut
interface vlan 2
ip address 10.64.19.25 255.255.255.0
no shut
However, when I run "sh ip interfaces" , I see that only interface vlan 1
is up. I go into int vlan 1 and issue a shutdown, then I notice that VLAN 2
interface comes up...
Can any one help with this please, or is this just how it works ?
____________________________________________
John Brandis
Network & Security Engineer
[EMAIL PROTECTED] Phone: +61 2 9278 0629 Helpdesk: +61 2 9278 0486
Level 20, THH
456 Kent St, Sydney
**********************************************************************
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
*********************************************************************
This email message (and attachments) may contain information that is
confidential to Solution 6. If you are not the intended recipient you cannot
use, distribute or copy the message or attachments. In such a case, please
notify the sender by return email immediately and erase all copies of the
message and attachments. Opinions, conclusions and other information in
this message and attachments that do not relate to the official business of
Solution 6 are neither given nor endorsed by it.
*********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53682&t=53682
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
