You can do this with TACACS among other things. Although, working in ops right now, I would protest with having only read permissions for production devices ;-)
hth, Mark. > -----Original Message----- > From: Adam Hickey [mailto:[EMAIL PROTECTED]] > Sent: Saturday, 21 September 2002 02:52 > To: [EMAIL PROTECTED] > Subject: priviledge levels [7:53723] > > > All, > > I want to configure a special priviledge level for our NOC in > all our cisco > devices to basically have all commands except config. Looking > at cco, if you > allow sh run at any priv level other than , the user will > only be able to see > the commands they can configure which defeats the purpose. > Anyone know a way > around this - so the NOC can have say a level 14 access and > be able to see > the > entire running-config without being able to configure anything? > > thx > Adam Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53738&t=53723 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
