interface Ethernet0 ip address 10.16.224.12 255.255.248.0 no ip route-cache no ip mroute-cache
ip default-gateway 10.16.224.1 ip classless ip alias 10.16.224.144 2001 ip alias 10.16.224.138 2002 line con 0 logging synchronous line 1 16 no exec transport input all Larry Letterman Network Engineer Cisco Systems Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of 1h line con 0 transport input all So, i tried to type the command, but couldn't. The result is -------------------------------------------------------------- Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#line con 0 Router(config-line)#transport input all ^ % Invalid input detected at '^' marker. Router(config-line)# -------------------------------------------------------------- I don't know why the command can't be input. There is the command In cisco documentation. (http://www.cisco.com/warp/public/793/access_dial/comm_server.html) Anyone can help me? sooil.. [TABLE NOT SHOWN][TABLE NOT SHOWN][IMAGE] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53793&t=53791 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
