""Lown Steve"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have been trying to establish the management interface for the 3550 in one > vlan, say 50 and trying to have connectivity with another vlan , say 60 , by > putting the interface vlan 50 in the same network and subnet as sixty, but > fail to have connectivity.
CL: sure. that's the way it is supposed to work. Can't put two different interfaces into the same subnet unless you are bridging. You have to route between vlans, or you have to use fallback bridging ( which applies mainly to non-ip protocols ) between the two vlans. > > Any suggestions?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53831&t=53813 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
