I seem to recall having to do an extended ping sourcing your secondary address to make your test work. That is no longer the case as I know I can do what your trying on a 6500/MSFC2
Dave sisco wrote: > > cisco gurus! > Does IOS c5rsm-jsv-mz.121-7.bin support secondary IP addressing on 5513 > catalyst switch with a layer3 switch (RSM).I've configured my interface > vlan2 with a secondary IP address but I can't ping my host From the rsm nor > cannot ping the gateway (2nd IP) from the host and to Isolate the problem > I've created another interface vlan3 and port then Add the IP address as > primary address and it works fine. > Regards -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53969&t=53948 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
