This might help.
http://www.cisco.com/warp/public/477/SNMP/chassis.shtml
-Moises
-----Original Message-----
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: Wed 9/25/2002 2:37 PM
To: [EMAIL PROTECTED]
Cc:
Subject: RE: Remote Serial # Retrieval [7:54120]
Sort of. You get someone to find and read the serial number to you. You
then
put it somewhere in the config where it can be retrieved. A banner can be
used but could be a security issue. One neat trick is to create a named
access list. Then put the SN in a remark line.
ip access-list standard Serial_Number
remark This router's S/N JAB00000000
> -----Original Message-----
> From: CTM CTM [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 25, 2002 3:58 PM
> To: [EMAIL PROTECTED]
> Subject: Remote Serial # Retrieval [7:54120]
>
>
> Hello all,
>
> Have inherited 4 routers with no documentation as to vendors,
> maintenance
> agreements etc. I have established a maintenance agreement is
> in place for
> at least one router and now need to establish for the other
> boxes. I only
> have physical access to one of the routers, the other three are out of
> country. I have full telnet access and am hoping I can
> retrieve the serial
> numbers that way. I tried a "sh ver" (just hoping for dumb
> luck) but no go.
>
> Is it possible to extract the router's serial from the command line?
>
> Thank you.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54136&t=54120
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
