Anybody have any ideas ? router tryes to boot, but goes in to rommon
rommon 8 > meminfo
Main memory size: 32 MB. Packet memory size: 16 MB
Available main memory starts at 0xa000e000, size 0x1ff2000
Packet memory starts at 0xa8000000
NVRAM size: 0x20000
rommon 9 > dir
usage: dir
rommon 10 > dir flash0:
bad device name
usage: dir
rommon 11 > reset
System Bootstrap, Version 5.3(10) [tamb 10], RELEASE SOFTWARE (fc1)
Copyright (c) 1994 by cisco Systems, Inc.
C4500 processor with 32768 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x2b01c4
*** Cache Error Exception ***
Cache Err Reg = 0xa0280108
data reference, primary cache, data field error , error not on SysAD Bus
PC = 0x80008b00, Cause = 0x0, Status Reg = 0x30408405
monitor: command "boot" aborted due to exception*(Hh.MQ.5
==QMQI.A1Y.IM%=
=AeI% !Q!
%EeeQ?e
%M
=MeMQ.5M1%9
95)C4500 processor with 32768 Kbytes
of
main memory
rommon 1 > dev
Devices in device table:
id name
flash: flash
bootflash: boot flash
eprom: eprom
rommon 2 > dir flash:
File size Checksum File name
4704832 bytes (0x47ca40) 0xdcec c4500-is-mz.120-7.bin
rommon 3 > boot flash: c4500-is-mz.120-7.bin
program load complete, entry point: 0x80008000, size: 0x47c924
Self decompressing the image :
#################################################
############################################################################
####
############################################################################
####
############################################################################
####
############################################################################
####
################################# [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-IS-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 14-Oct-99 04:14 by phanguye
Image text-base: 0x60008930, data-base: 0x608DA000
cisco 4700 (R4K) processor (revision E) with 32768K/16384K bytes of memory.
Processor board ID 04320998
R4700 processor, Implementation 33, Revision 1.0 (512KB Level 2 Cache)
G.703/E1 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
4096K bytes of processor board Boot flash (Read/Write)
Press RETURN to get started!
00:00:03: %LINK-4-NOMAC: A random default MAC address of 0000.0c83.0998 has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
00:00:05: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-IS-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 14-Oct-99 04:14 by phanguye
Error: primary data cache, fields: data, SysAD
virtual addr 0x60D80100, physical addr(21:3) 0x180100, vAddr(14:12) 0x0000
virtual addr 0x60D80100, physical addr(21:3) 0x180100, vAddr(14:12) 0x0000
=== Flushing messages (00:39:41 UTC Thu Nov 21 1996) ===
Buffered messages:
00:00:03: %LINK-4-NOMAC: A random default MAC address of 0000.0c83.0998 has
been chosen. Ensure that this address is unique, or specify MAC
addresses for commands (such as 'novell routing') that allow the
use of this address as a default.
00:00:05: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 4500 Software (C4500-IS-M), Version 12.0(7), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 14-Oct-99 04:14 by phanguye
Queued messages:
00:01:06: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
out
put.
No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
*** System received a Cache Parity Exception ***
signal= 0x14, code= 0xa4180100, context= 0x60c0c5c0
PC = 0x602cbbc0, Cause = 0x8020, Status Reg = 0x34008002
rommon 4 >
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54591&t=54591
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
