I've done it...it took both feeds fine (for a few minutes...didn't run it too long), however does not act "redundant" The switch will loose power going to DC.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Koen Zeilstra Sent: Monday, October 07, 2002 3:59 AM To: [EMAIL PROTECTED] Subject: redundant power feed for 3548 XL [7:54988] Hi All, The 3548XL has like the 2900 a DC input as well as a AC input. Has anyone of you guys tried to connect both? The manuals says not to do it. If this works you'll have a very cheap redundant power solution, of course Cisco doesn't like it and will say it's impossible.... ;-) Any experience connecting the AC to wall power and DC with a external power supply? grtz, Koen ----------------------- Cleanliness is next to impossible. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55075&t=54988 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
