Sam, Have you taken a look at NBAR? Take a look at the Cisco IOS Quality of Service Solutions Configuration Guide it should work for you.
-Cliff -----Original Message----- From: "sam sneed" To: [EMAIL PROTECTED] Date: Tue Oct 08 10:19:08 PDT 2002 Subject: protocol monitoring software [7:55110] >Hello, > > I am looking for software that will monitor what kind of traffic is going >through my network and report it.I am only concerned with what is going >through my firewall so I will place the monitoring station on a hub with the >firewall or use SPAN port. Here are requirements: > >Doesn't use netflow to collect data, want to use libpcap to capture data. >Want breakdown of what type of traffice by bytes and %'s ie. HTTP, FTP, SMTP >etc. >Do not want to use NTOP, too much of a pain in the ass to get it to work >longer than 20 minutes without a seg fault. >Would like the output in graphical form preferbably embeded in a web page. > >If anyone has come across this please let me know. I'm contemplating writing >my own software but would rather not. > >Thanks. ___________________________________________________ GO.com Mail Get Your Free, Private E-mail at http://mail.go.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55145&t=55110 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
