Looks like this: Port Name Status Vlan Duplex Speed Type ----- -------------------- ---------- ---------- ------ ----- ------------ 1/1 connected trunk full 1000 1000BaseSX 1/2 notconnect 1 full 1000 No Connector 2/1 connected trunk full 1000 1000BaseSX 2/2 notconnect 1 full 1000 No Connector 3/1 notconnect 1 full 1000 1000-LX/LH 3/2 notconnect 1 full 1000 1000-LX/LH 3/3 notconnect 1 full 1000 1000-LX/LH 3/4 notconnect 1 full 1000 1000-LX/LH 3/5 notconnect 1 full 1000 1000-LX/LH 3/6 notconnect 1 full 1000 1000-LX/LH 3/7 notconnect 1 full 1000 1000-LX/LH 3/8 notconnect 1 full 1000 1000-LX/LH 3/9 notconnect 1 full 1000 1000-LX/LH 3/10 notconnect 1 full 1000 1000-LX/LH 3/11 notconnect 1 full 1000 1000-LX/LH 3/12 notconnect 1 full 1000 1000-LX/LH 3/13 notconnect 1 full 1000 1000-LX/LH 3/14 notconnect 1 full 1000 1000-LX/LH 3/15 notconnect 1 full 1000 1000BaseSX 3/16 3548XL-Access notconnect 202 full 1000 1000BaseSX
>>> "Aziz Islam" 10/10/02 06:04PM >>> Hi Group, Is there a way of finding out if a 8-port or 16-port Gigabit Ethernet module on a Catalyst 6509 Switch has GBIC's installed by consoling into the box. A quick answer can be to just look at the Catalyst 6509 from the front, however, I only have telnet access into the switch. Thanks in advance. Aziz S. Islam Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55334&t=55321 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
