This is a simple solution. Do this: static (inside,perimeter) 192.168.11.0 192.168.11.0 netmask 255.255.255.0 This will make the pix acts like a router with traffic from 192.168.11.0 to communicate with 192.168.23.0; however, you have to make access-list to allow network 192.168.23.0 to talk back to 192.168.11.0 because perimeter has lower security level than the inside interface. Guruprasad Sanjeevi wrote:Hi group,
I am trying to configure PIX .It has 3 Ethernet Interface and three networks are used. LAN (inside) : 192.168.11.0 DMZ (perimeter)) : 192.168.23.0 Outside:66.x.x.x Problem : users from Inside and Perimeter network are able to browse, but the inside and Perimeter network cannot talk to each other. I have given the static command like this Static(inside, perimeter) 192.168.23.0 192.168.11.0 0 0 What other command is required on the PIX to enable communication from INSIDE network to DMZ(perimeter) and vice-versa. Please help.... Thanks Guruprasad [GroupStudy.com removed an attachment of type application/ms-tnef which had a name of winmail.dat] Do you Yahoo!? Faith Hill - Exclusive Performances, Videos, & more faith.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55624&t=55608 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
