Whats new ? Got a problem here that may need to go to TAC, hoiwever I thought I would see if you had any idea's first.
Took delivery of my 4006 last week. Put on the latest rom and IOS relases for the particular model of the supIII I need to create a trunk link on ports gigabit ethernet 2/1 - 2/10 I use the following command on int 2/1 & 2/2 Interface gigabitethernet 2/1 Switchport trunk encapsulation dot1q Switchport mode trunk Now, this is where I get the error. I try it on another port on module 2. Interface gigabitethernet 2/3 Switchport trunk encapsulation dot1q %unrecognised command% Got any ideas for me on that one ? John ********************************************************************** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk ********************************************************************* This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55664&t=55664 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
