We are bringing in a second DS3 line into our Cisco 7206 v12 router and was hoping for some general advise. Our current provider is a 9mbps DS3 from Genuity. We are bringing in a seconds DS3 from PAJO at 6mbps for redundancy and to bring the usage down on the Genuity line.
My question is what commands do I need to look into when I have the BGP4 setup on the router in order to handle the flow of traffic properly? 90% of our traffic is OUTBOUND (up to the internet) and we need to balance this traffic between the 9mbps and 6mbps connections. From what I am told this won't be an automatic process but something I will have to tweak on occation depending on if traffic demands change between the connections. How am I best going to control this outbound flow of traffic? My idea was that when one connection is using a high % I can manually modify a metric of some sort to make the router believe that that connection is not as preferred as it once was and start sending a little of the traffic over the other connection instead. Am I being realistic here? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55918&t=55918 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
