1- Try to remove the prepending you did and see whether things will come back to normal or not.
2- If it came back to normal condition then check the way you are configuring this route-map and discuss it with your ISP to get more feedback from him The processor & memory readings you provided are encouraging so it shouldn't be an issue with the router itself. Finally if nothing worked out paste your config to the group maybe someone can point the configuration problem - if any - >From: "Jose Tomas Pinal Salvador" > >Hello Study Group. > >Currently I have 3 differents BGP sesions establish with 3 differents >providers. Each provider announce me about 115400 prefixs. Yesterday I was >making traffic load balacing between then, using the prepend comand such >others days (this actions are doing often in order to use the BW properly), >when I tried to apply the comand prepend and after the command clear ip bgp >(loopback provider) soft in/out to reset soft the prefix of the provider #2 >everything was ok for the first 20 minutes but after the traffic acrooss >the provider #2 was down about 80%. > >Following, I could see with the comand sh ip bgp sum, that this provider >only could announce me about 20000 prefix, no more and the BGP sesion with >them started to be intermitent. With debug command I got it the following: > >40w3d: %BGP-5-ADJCHANGE: neighbor 206.49.192.5 Down BGP Notification sent >40w3d: %BGP-3-NOTIFICATION: sent to neighbor 206.49.192.5 4/0 (hold time >expired) 0 bytes >40w3d: %BGP-5-ADJCHANGE: neighbor 206.49.192.5 Up >40w3d: %BGP-5-ADJCHANGE: neighbor 206.49.192.5 Down BGP Notification sent >40w3d: %BGP-3-NOTIFICATION: sent to neighbor 206.49.192.5 4/0 (hold time >expired) 0 bytes >40w3d: %BGP-5-ADJCHANGE: neighbor 206.49.192.5 Up > >The provider and me started to do some troubleshooting and in his router he >could see that all the prefix keep on in queque and my router was not allow >to get the rest of the prefix. > >So, it is looks like a memory problem but my router have 60% free memory(sh >proc memo) and 39%cpu utilization(5 minutes, sh proc cpu).The provider >router have about the same numbers. > >Note:I have a Cisco Router 7513, IOS version 12.1.(6)E. > >I will aprecciate your helps. >Thanks very much. >Sorry for my english is not my native lenguages. >Josi Pinal. > > > > > > > >_________________________________________________________________ >Protect your PC - get McAfee.com VirusScan Online >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > misconduct and Nondisclosure violations to [EMAIL PROTECTED] ------------------------------------------------------------------------ Get a speedy connection with MSN Broadband. Join now! Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55950&t=55944 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
