HI all NEED YOUR HELP URGENTLY!!!ANY X.25 EXPERTS LISTENING...... I have installed cisco 3640 as an x.25 switch at one of our customer place.Im using X.21 DCE cable which is connected to NM-8A/S.And ach port is giving a clock of 64K.to the device attached to this.This devices are MSC's(Mobile switch's) and SUN machines with X.21 interface.
This router has replaced traditional X.25 switch.All the parameters on the ports are OK and the interface are coming up.If u see the config of 3640,on port 2/2 one OMP machine(basically sun machine)which acts as a console is connected.From this console,it makes X.25 calls to MSC switches i.e to all other ports. Since i have configured router as a switch,from that console i should be able to make X.25 call to all of the port.But its not happening.Im just able to make a call to one single interface whose route is the 1st route and the other x.25 calls to other ports are not happening.If u see the 1st route the destination add. is 8888.So the 1st call happens successfully but second call to another add.i.e to another port is not happening.But if i remove that 1st route and then try to make a call to 3333 which was a second route earlier and now the 1st one,the call establishes. Please suggest as to what should be added in x25 routing. The main intention is that from ,Console which is connected to se2/2 shoule be able to make x.25 call to all other ports. Config is attached. sh runn Building configuration... Current configuration : 1910 bytes ! version 12.2 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname bp ! enable password cisco ! ip subnet-zero ! ! ! x25 routing ! ! ! interface Serial2/0 description connected to HLR no ip address encapsulation x25 dce x25 address 8888 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/1 description connected to CMISE1 no ip address encapsulation x25 dce x25 address 4401 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/2 description connected to OMP10 no ip address encapsulation x25 dce x25 address 2222 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/3 description connected to MSC1 no ip address encapsulation x25 dce x25 address 3333 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/4 description connected to MSC2 no ip address encapsulation x25 dce x25 address 3322 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/5 description connected to CMISE2 no ip address encapsulation x25 dce x25 address 1122 x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! Serial2/6 no ip address encapsulation x25 dce x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 ! interface Serial2/7 no ip address encapsulation x25 dce x25 htc 32 x25 win 7 x25 wout 7 x25 idle 5 x25 nvc 8 clockrate 64000 x25 route 8888 source 2222 interface Serial2/2 x25 route 3333 source 2222 interface Serial2/2 x25 route 3322 source 2222 interface Serial2/2 ! line con 0 line aux 0 line vty 0 4 password cisco login ! end Thanks and Regards, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55369&t=55369 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
