I knew this question was going to lead to trouble! Okay, here goes. First thing, if the incoming call digit string will be matched to the destination-pattern of a VoX dial-peer, there is no prefix or forward command available. In a VoX dial-peer you are mapping a telephone address (the destination-pattern) to a Network address (session target with Layer 2 or Layer 3 address). This is your voice routing table! This is the logical routing plan you created when you designed this voice network. This is a static routing table you created. Why would you map an address one way, then try to modify it before you sent it to the ultimate destination? Dial plans are simply static routing tables. There is no EIGRP for voice networks, yet. Digit stripping happens ONLY on POTS dial-peers. Digits described explicitly (333 in 333....) are consumed during the digit analysis. The prefix command can be used to replace the consumed digits, or the forward digits command can direct that X number of digits are to be preserved and sent across the POTS line once it is active. The E&M should do what you want if you want to only send 4 digits to the other end. The VoIP dial-peer will send all digits that match the destination-pattern statement. This all depends on what you are trying accomplish. This isn't clear because you are mixing FXOs and E&Ms which you can't do. Maybe this will get you aimed in the right direction. Feel free to email me with what you are trying to do. the configuration may be very simple. Bruce
Paul Oh wrote: Hello All, When FXO receives a phone call, it strips out corresponding called-number that matches destination pattern settings.. For instance, If call string that matches 333.... , it will strip 333 and pass on last four digit. IF there is next hop voip router only sees last four digit. (Isn't that correct?. Now, how can we make that happen for E&M card? (VIC-2E&M)? "digit-strip" is enabled by default, but next router only sees 333-xxxx instead of xxxx. Help me out. Thank you. -Paul -- Bruce Enders Email: [EMAIL PROTECTED] Chesapeake NetCraftsmen o:(410)-280-6927, c:(443)-994-0678 1290 Bay Dale Drive, Suite 312 WWW: http://www.netcraftsmen.net Arnold, MD 21012-2325 Cisco CCSI# 96047 Efax 443-331-0651 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56603&t=56536 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
