test... ""Chris"" wrote in message news:200211032206.WAA18182@;groupstudy.com... > You either have to use the high availability config synch config options. > ie. > > Interface lvan 2 > ip add x.x.x.x x.x.x.x standby ip add x.x.x.x x.x.x.x > > or you have to config everything on the active including the Flexwan, fail > it over and config everything on the standby including Flexwan then fail it > back. > > > > ----- Original Message ----- > From: "Tim O'Brien" > To: ; > Sent: Sunday, November 03, 2002 3:17 PM > Subject: OT: 6509 w/2 SUP2/MSFC2 and FlexWAN > > > > Hello, > > > > I am working on a high availability solution for a single 6509. The > > customer currently has a 6509 with dual SUP 2's and dual MSFC2/PFC2's. > > This box also has a FlexWAN module and I am having some difficulty > > locating any useful information on Cisco's new site about setting this > > up with some high availability or redundancy. When I configure the > > MSFC's like normal with HSRP on all of the VLAN interfaces only the MSFC > > in the active SUP can see the FlexWAN module and serial ports. They do > > not even show up on the second MSFC. Is there a "Ciscoized" way to set > > this up? > > > > Thanks for any help! > > > > Tim
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56779&t=56775 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
