Maximums, Classification is the ability to identify and group specific packets(source and destination ip address..or source and destination UDP port number). After the packet has been classified then you Mark it by setting bits in the IP header(DSCP, IP precedence.....)
Juan Blanco -----Original Message----- From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com]On Behalf Of ""B.J. Wilson"" Sent: Monday, November 04, 2002 6:39 AM To: [EMAIL PROTECTED] Subject: "Classification" vs. "Marking" [7:56792] Hey Proximo - I'm sitting here looking over the outline of the DQOS test, and one of the bullets says to "Explain the difference between classification and marking." I'm looking over the QoS Config Guide, and can't seem to find any clear distinction between the two - the Guide seems to be using the terms interchangeably. Anyone have any insight into this? Thanks, Maximus CCNP, SPQR Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56797&t=56792 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
