What is the difference between TX WRED threshold and TX drop threshold For example, with the default value:
Tx drop thresholds: Queue # Thresholds - percentage ------- ------------------------------------- 1 80% 100% 2 80% 100% Tx WRED thresholds: Queue # Thresholds - percentage ------- ------------------------------------------ 1 80% 100% 2 80% 100% In the queue 1, threshold 1 start drops packets when buffer reaches 80%. The frames that will trigger the threshold 1, queue 1 is CoS 0 1 for both cases Even that, after start drop, the congestion management will discard any frames - CoS 0 1, CoS 2 3 and so on, in the case WRED is not supported Am I right ? Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57006&t=57006 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
