there is no flash, it's bootflash: for the internal, slot0: or disk0: for the external.
http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007f2cf.html Dave Azhar Teza wrote: > > IIs there any link about Catalyst 6509 Flash Architecture. I am not able to > see my Flash device if I run any of the commands such as "SHOW FLASH:, SHOW > DISK0: etc). I like to see how much space has been taken by the IOS in Flash > memory, but doesn't seem to work. I am also having problems copying the IOS > and Config file to my Flash Card. It just errors out. I couldn't evenfind > a ciso link where the sample configs are shown about copying the contents. > Thanks, > > _______________________________________________ > Join Excite! - http://www.excite.com > The most personalized portal on the Web! -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57010&t=57008 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
