Hello Group
Can any one help me get my switch working. Its a 1924 with 2 100tx but it
uses a null modem cable for the console port. I have never had it working
since I have had it, it has a orange status light on the front but all the
port lights are blank. When trying to log on to it comes up with the
following:
Diagnostic Console - Systems Engineering
Operation firmware version: 0.00 Status: Invalid
Boot firmware version: 1.08
WARNING!!! Operation Firmware is invalid.
Upgrade firmware to enable switch operation.
[U] Upgrade operation firmware (XMODEM)
[S] System Debug Interface
Enter Selection:
I have down loaded cat1900A.9.00.04 file from the Cisco website and tried
uploading the image using tera terminal send file option. It then loads the
file and once finished it says upgrade it comes with the following message:
Erasure completed. Waiting for new image...
System Upgrade failed.
Diagnostic Console - Systems Engineering
Operation firmware version: 0.00 Status: Invalid
Boot firmware version: 1.08
WARNING!!! Operation Firmware is invalid.
Upgrade firmware to enable switch operation.
[U] Upgrade operation firmware (XMODEM)
[S] System Debug Interface
Enter Selection:
Has any one got any ideas on how to fix this problem. I am sure I have seen
something like this posted before but at the moment I can not search through
the archives.
Thanks in advance
Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57017&t=57017
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
