Hi
I kindly ask your help about Dual Leaky Bucket on 6000 switches and LS1010 ATM switch The following definition is from the Cisco page at http://cisco.com/warp/public/473/152.html#eigth "Data from the second bucket is sent at a rate defined by the erate parameter minus the rate parameter" In the example: Console> (enable) set qos policer aggregate AGG1 rate 10000 policed-dscp erate 12000 drop burst 13 eburst 13 data in the second bucket is sent at 12000 minus 10000. For the LS1010 Dual Leaky I found that the data is transmitted at the value specified in the erate. Is the algorithm different for the 6000 family compared to the LS1010 ? Best Regards, Alaerte Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57045&t=57045 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
