David,
Absolutely.
When specifying the translation commands, instead of specifying a full
IP translation just specify the port. For example, assuming you wanted
your public IP (12.12.12.12) to redirect HTTP traffic to 192.168.0.1 and
HTTPS traffic to 192.168.0.2:
static (inside,outside) tcp 12.12.12.12 80 192.168.0.1 80 netmask
255.255.255.255 0 0
static (inside,outside) tcp 12.12.12.12 443 192.168.0.2 443 netmask
255.255.255.255 0 0
conduit permit tcp host 12.12.12.12 eq 80 any
conduit permit tcp host 12.12.12.12.eq 443 any
- Tom
Dave Tyler wrote:
> This is just a bit off topic and I have several questions about the PIX.
>
> We currently run a Symantec Enterprise Firewall and we are considering
> moving
> to a Cisco PIX 506E or 515E. The SEF runs DNS and has the ability to
listen
> to a range of IP addresses on a single interface then proxy the calls. The
> question about a PIX is whether it can do the same thing? As I read the
> documentation from Cisco I did notice the SMTP redirection. Can the PIX
> redirect for https and http from different different public IP address
calls
> on a single interface? Like OWA over https to one system and http traffic
to
> a different system?
>
>
> David Tyler
> IT Manager
> Clear Technology Inc.
> [EMAIL PROTECTED]
> www.clear-technology.com
>
> "This document, and any attachments, may contain confidential and
proprietary
> information of Clear Technology, Inc. Any unauthorized dissemination or
> copying is strictly prohibited. If you are not the intended recipient,
please
> destroy or return this document without reading or copying it, and notify
us
> immediately. Clear Technology will protect its intellectual property rights
> to
> the maximum extent possible under law."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57169&t=56994
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
