Yes, you must go into rommon to load an activation key prior to 6.2
software. Boot into rommon and use the following commands:
server
address
file
tftp = starts the transfer.
At some point it will ask you if you want to enter a new activation key.
rgds,
C
-----Original Message-----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: 12/11/02 12:47
Subject: 3DES license on Pix 6.1(2) [7:57280]
Folks
I am going to be activating 3DES on a pix 506 running 6.1(2) tommorow
and I am a little unclear on the procedure. I know I cant use the
activation-key command as that wasnt added until 6.2.
The only real documentation I have found seems to say that I have to
reinstall the software image through monitor mode and that I cant use
the "copy tftp flash" command.
Could someone confirm this for me.
Thanks
Peter
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept for
the
presence of computer viruses.
For more information contact [EMAIL PROTECTED]
phone + 353 1 4093000
fax + 353 1 4093001
**********************************************************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57283&t=57280
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
