Has anybody tried to connect a LS1010 and an Alcatel OmniSwitch using atm? We are having a lot of problems with the following scenario
LS1010 --ATM OC3--- Omniswitch ----- Videoconference device | | ATM OC3 | | Omniswitch | | Videoconference device The LS1010 has an atm address 47.0091.8100.0000.0005.5e8f.4401.0005.5e8f.4401.00 on the other hand the omniswitches have atm addresses 39.0348.8001.bc90.0001.013d.6cc0.xxxx.xxxx.xxxx.xx 39.0348.8001.bc90.0001.013d.2f20.yyyy.yyyy.yyyy.yy Due to the different AFI code I presume that I can't use PNNI, and I need to use static atm routing, can anybody confirm this point? The guys that manage the Videoconference devices say that they work establishing SVCs through the ATM network, if we connect directly the Omniswitches there is no problem, so I suppose that I am doing something wrong, do I need to configure svcs on the LS1010? Thanx in advance, and sorry for being so imprecise, but the situation it's a bit difficult to explain and I'm quite lost. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57317&t=57317 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
