The MC3810 requires 64MB of RAM to run a VoIP feature set. You'll also almost certainly need 16MB of flash as well. To support the 64MB of RAM, you'll have to also get an updated BootROM. Those are free from Cisco's 1-800 line - part number BOOT-381V=. And of course, once you have all of that, you'll also need to get a voice-enabled image (something with a "v5" in it). Also, the 3810 needs some sort of hardware to support your VoIP needs. This includes a DSP module and some type of voice interface, either digital (T1 or E1), or analog (E&M, FXS, or FXO).
It's a lot to digest, but I hope it helps :). James Willard [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com] On Behalf Of HulaJoe Sent: Thursday, November 14, 2002 3:06 AM To: [EMAIL PROTECTED] Subject: MC3810 - VoIP Requirements [7:57426] Hello All, I just purchased a 3810 to practice some Voice labs. I was hoping someone could answer a quick question for me. The 3810 I'm getting has 32 MB of RAM - Is this enough to run the 3810 as a VoIP GW ? Can someone give me some insight in regards to setting up the 3810 to support VoIP ? Thanks in advance! Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57456&t=57426 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
