MADMAN wrote:
> 
> I have a 6500 in both hybrid and native modes since we have customers
> doing both.  I am not sure what you mean when you say you can't see the
> RP in the cat running OS.  The RP and SP convention are particular to
> native mode.  When running catOS the "RP" is the MSFC and you
> session/switch console to it and frmm there look at it's flash.  In
> native there is no clear delineation between the two, it's one big
> router.
> 
> 
> Patrick Donlon wrote:
> >
> > I eventually worked it out. It seems that you can't see a flash card on a
> RP
> > on a 6000. I'd done a lot of testing with a loaned 6500 for upgrading
from
> > Cat OS Hybrid IOS and back again, just in case. On the 65 you can see the
> > flash and so boot from it in rommon, which is great because I can leave
my
> > old images on the bootflash. On the 6000 though, no go, so I had to clear
> > out my bootflash and hope that I didn't have to revert back and use all x
> > modem etc. Strange thing was though that I have 4 identical 6Ks, 2 with
Cat
> > OS and the other 2 with native IOS, the Cat OS 6ks couldn't see the flash
> > card in the RP but could with the SP, the IOS ones could see it no
prob's.
> 
> I have a 6500 in both hybrid and native modes since we have customers
> doing both.  I am not sure what you mean when you say you can't see the
> RP in the cat running OS.  The RP and SP convention are particular to
> native mode.  When running catOS the "RP" is the MSFC and you
> session/switch console to it and frmm there look at it's flash.  In
> native there is no clear delineation between the two, it's one big
> router.
> 

   DOH! Is there an echo in the post ;)


David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

"You don't make the poor richer by making the rich poorer." --Winston
Churchill




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57637&t=57551
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to