hi, not really...
LMS was never designed to do this .. I too have never been able to get the polled info back quick enough for my liking I spoke to an instructor who said that it will only update after 5 minutes and that it is not as responsive as he would have liked what you could do is download "SNMPc" ...it is a small but useful "HP Openview Netowrk Node manger" type program....whic will give you instant updates.....or you could try solarwinds "network performance monitor" ...which is the same sort of thing... both are quite cheep to buy and should suit a small upto 100 device network ... HTH steve ----- Original Message ----- From: "richard beddow" To: Sent: Thursday, November 21, 2002 5:16 PM Subject: LMS v2.1 [7:57845] > I am currently configuring an LMS to manage a small number of 2950 and 3550 > switches. All appears ok except for one issue. When i pull a cable and > bring a port down the GUI takes up to 5 minutes to update. Traps are sent > and the polling period is down to 30 secs but the topology diagram still > does not update immediately. Is there any way to have instant notification > of this (or any other) event? > > Thanks in advance, > > Filo. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57850&t=57845 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
