Cat 6509 (SW 5.5(16)) with MSFC (Version 12.1(1)E). The MSFC has over 15 vlans. The vlan in question has over 60 active devices. There is one device that when pinged (datagram size does not change the result) it produces a source quench. All other devices on the vlan respond to pings ok. >From the command prompt on my desktop the result is the same. >From a unix server the ping results are normal. >From the switch the ping results are normal. Specifications of the server are unknown. The port that the device connects to is set to 100/full and has no errors. The MSFC and switch resources are fine The vlan interface does not have any errors. The switch and router module are both heavily used and it appears this issue is only happening to the one device.
Can anyone tell me why this is happening? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57870&t=57870 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
