This is just a hunch, but could you possibly have a high performance VCM in a non-V3 MC3810 (i.e., MC3810 or MC3810-V)? It will say on the back of the chassis what type it is. Only the V3 model supports the high performance VCM, so using one in a non-V3 might cause that error...
James Willard [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of cebuano Sent: Friday, November 22, 2002 11:29 PM To: [EMAIL PROTECTED] Subject: Weird MC3810-VCM6 error [7:57916] Hi group. I'd like to know if anyone else has seen this strange error in MC3810 with VCM6. Basically, if I load an IOS that has no Voice feature, the card is detected as. 1 6-DSP(slot2) Voice Compression Module(v01.K0) and the router boots fine. If I load any image with Voice, the card is detected as. 1 6-DSP(slot2) High Performance Compression Module(v01.K0) and the router loops with this error. c54x_state_readyWARNING: DSP type unknown & defaulted to C542 c54x_state_readyWARNING: DSP type unknown & defaulted to C542 c54x_state_readyWARNING: DSP type unknown & defaulted to C542 c54x_state_readyWARNING: DSP type unknown & defaulted to C542 Any ideas? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57917&t=57916 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
