All I just upgraded a few on my 2500's in my lab to 16 meg flash everything went fine except on 1 of them. When I added the 2nd 8 meg flash chip to this particular router one I call London this is the print out I get. Why does it show 2 separate flash one read and one read write? All the other ones are the exact same way but they show 16meg flash read only. Any help would be greatly appreciated.
Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.0(9), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Mon 24-Jan-00 21:46 by bettyl Image text-base: 0x0303DF2C, data-base: 0x00001000 cisco 2500 (68030) processor (revision A) with 16384K/2048K bytes of memory. Processor board ID 01228542, with hardware revision 00000000 Bridging software. X.25 software, Version 3.0.0. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash partition 1 (Read ONLY) 8192K bytes of processor board System flash partition 2 (Read/Write) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=57962&t=57962 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
