Thanks Marshal, for the input!!!
""Marshal Schoener"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am using a Cisco 3002 hardware client with a 3000 series gateway from NY > to Malaysia... > True VPN / IPsec between the 2 sites... > We put VoIP across this VPN, and it works unbelievably well. So much better > than we even hoped it would. > We have an E1 on the Malaysian end and a T1 on the NY end... So there is > good bandwidth... > > The VoIP hardware and software we are using is really old. It is called an > ITSE server. Internet Telephony Server... Basically, the servers have NT > installed, and have this ITSE software installed. They are directly > connected to our switch and given a phone extension on each side of the > tunnel. All we have to do is dial that extension, and it gives us a dial > tone on the switch on the other side of the tunnel. > There are times when it doesn't connect right away, but if you just hang up > and call again, it normally works fine. I would say about 95% of the time > the call sounds like a perfect international phone call. > > The other 5% there is too much noise and delay, but IMO that is a small > price to pay for free international phone calls to literally the other side > of the world. We saved $6000 a month by getting rid of the frame-relay and > installing this VPN, and couldn't be happier :-) > > GOOD LUCK! > > -----Original Message----- > From: Thomas N. [mailto:[EMAIL PROTECTED]] > Sent: Friday, November 22, 2002 9:57 AM > To: [EMAIL PROTECTED] > Subject: VoIP over IP-VPN [7:57880] > > > Hi All - I am wondering if anyone here has VoIP working well over IPSec > tunnels? Cisco said this could be done, but I am not sure how this approach > works in a practical internet enviroment? Thanks! > > TN Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58141&t=57880 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
