I've seen similiar things happen here. The problem was interface errors on switchports. Check the port where the CSS is plugged into switch and where "high load" webserver is plugged for interface errors. The CSS seems to be very sensititve to lost packets when calculating load so I'd check this out.
""sukhesh T"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All, > > I have a pair of CSS 11150 switched (vrrp configured for redundancy) > configured for load balancing between 2 web application server (Layer 5).The > setup up was working alright and we tested the load balancing and the > request used were going to both servers on round robin. > > Now I am facing problem that the request is sent to only one server. When I > see "show load" it shows for one server1 as 2 and server2 as 255 and that > is the reason request is not being sent to server2. The CSS is using all > default configuration related to load treshold and teardown timer etc. > > Can anyone tell me how to reset the load value on the CSS..or any other info > on this will be highly appreciated. > > Regards, > > Sukhdev. > > > _________________________________________________________________ > The new MSN 8: smart spam protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58190&t=58171 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
