Hi all I am facing a problem in configuring the G.SHDSL. When i give show int atm, the line is down and protocol is down. this means there should be some problems in the cable. but i changed the cables with the new one which i took it from the working setup, still the line is down and protocol is down. I am connecting the soho78 and c828 routers. One port of c828 is connected to one port of DSLAM and other port of the DSLAM is connected to the other port of the soho78. I am attaching the configurations with this. Also is the configuration of the DSLAM. Please can somebody help me out in solving this!!!
CO828#sh ru Building configuration... Current configuration : 846 bytes ! version 12.2 service config no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname CO828 ! no logging console ! ip subnet-zero no ip domain lookup ! vpdn enable ! vpdn-group 1 accept-dialin protocol pppoe virtual-template 10 ! ! ! ! ! interface Ethernet0 ip address 10.77.152.134 255.255.255.0 hold-queue 100 out ! interface Virtual-Template10 ip address 192.168.10.1 255.255.255.0 ip mtu 1492 ! interface ATM0 no ip address no atm ilmi-keepalive pvc 15/100 protocol pppoe ! dsl equipment-type CO dsl operating-mode GSHDSL symmetric annex A dsl linerate AUTO ! ip classless ip route 0.0.0.0 0.0.0.0 10.77.152.129 ip http server ! ! ! line con 0 line vty 0 4 scheduler max-task-time 5000 end ------------------------------------------------------ CPEsoho78#sh ru Building configuration... Current configuration : 755 bytes ! version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname "CPEsoho78" ! ! ip subnet-zero ! ! ! ! interface Ethernet0 ip address 10.77.152.136 255.255.255.0 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive pvc 16/100 pppoe-client dial-pool-number 10 ! dsl equipment-type CPE dsl operating-mode GSHDSL symmetric annex A dsl linerate AUTO ! interface Dialer10 ip address 192.168.10.2 255.255.255.0 ip mtu 1492 encapsulation ppp dialer pool 10 ! ip classless ip route 0.0.0.0 0.0.0.0 10.77.152.129 ip http server ! ! line con 0 stopbits 1 line vty 0 4 ! scheduler max-task-time 5000 end ------------------------------------------- DSLAM CONFIGS 6260#sh run int atm 23/1 Building configuration... Current configuration : 166 bytes ! interface ATM23/1 description "Router Security Device Manager Team: Used by [EMAIL PROTECTED]" no ip address dsl profile LAB no atm ilmi-keepalive end 6260#sh run int atm 23/2 Building configuration... Current configuration : 229 bytes ! interface ATM23/2 description "Description: "Router Security Device Manager Team:...Deepak"" no ip address dsl profile LAB no atm ilmi-keepalive atm pvc 16 100 interface ATM23/1 16 100 conn-type end-to-end end --------------------------------------------------------- Thanks and Regards Deepak Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58336&t=58336 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
