The PDM doesn't support commands such as the 'alias' command; if your config has an unsupported command (from the PDM point of view) in it, when you load the PDM, it will only let you have access to the Monitor Tab. Hopefully, they'll fix this in the next revision... but one can only hope.
-Mark -----Original Message----- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 04, 2002 11:27 AM To: [EMAIL PROTECTED] Subject: Cisco PDM and Manual configuration [7:58555] I have a quick question for the group. Normally I configure PIX's by hand, manual, straight forward configs. I seem to remember that it use to be a no-no to mix manual configuration of a PIX with PDM configuration, something about PDM getting confused, or the manual configuration getting hosed by PDM. Is it still that way, or is it safe to use PDM and then from time to time do something manual? Thanks, Brian -- ----------------------------------------------- Brian Feeny, CCIE #8036 e: [EMAIL PROTECTED] Network Engineer p: 318.222.2638x109 ShreveNet Inc. f: 318.221.6612 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58599&t=58555 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
