I had a similar problem with my 2610 , I bought a smartnet and got a replacement from Cisco , I am not sure if 2514 is covered by Cisco in there Smartnet Package .
Navin ""Keyur Lavingia"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I have two 2514s that are giving problems with the console ports. One of > them does not give any output at all when you power it on and the other one > does not take any input at all. It starts fine, and then halts at the > initial config dialog. I am not able to give it a break either. > > I have other routers and they are working fine, so I am sure its not the > hyperterminal settings that can be bad. Does someone know of any jumpers > that I can play with on the 2514 or is there any other way out ? I have 16 > MB Flash and DRAM on both the routers. I have tried this with IOS 12.0.7. > > Please advise. > > Keyur. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59229&t=59040 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
