Hi all- I have a question regarding chap. I configured a dialer profile and used chap, I then specified the "dialer remote name" and then set the password on the remote peer. Then I added the "ppp chap hostname" and ppp chap password" on each side with passwords. Although I did see both sides authenticating successfully via debug ppp neg, the link didnt come up. I had to remove the "dialer remote name" on both sides. I assume the dialer remote name takes some precedence over the ppp chap hostname command. Anyone have any input on this one for me? Here are my configs.
r3 ! interface Dialer15 ip address 155.100.31.3 255.255.255.0 encapsulation ppp ip ospf cost 5555 ip ospf demand-circuit dialer pool 15 dialer idle-timeout 25 dialer wait-for-carrier-time 60 dialer string 5551234 dialer string 5551235 dialer hold-queue 10 dialer load-threshold 2 either dialer-group 1 ppp max-bad-auth 5 ppp chap hostname router3 ppp chap password 7 070C22454B ppp multilink ! r1 ! ! interface Dialer15 ip address 155.100.31.1 255.255.255.0 encapsulation ppp ip ospf cost 5555 ip ospf demand-circuit dialer pool 15 dialer idle-timeout 25 dialer string 5554000 dialer string 5554001 dialer hold-queue 10 dialer load-threshold 2 either dialer-group 1 ppp max-bad-auth 5 ppp chap hostname router1 ppp chap password 7 1511080501 ppp multilink ! 03:22:54: BR0/0:1 LCP: State is Open 03:22:54: BR0/0:1 PPP: Phase is AUTHENTICATING, by both 03:22:54: BR0/0:1 CHAP: Using alternate hostname router3 03:22:54: BR0/0:1 CHAP: O CHALLENGE id 74 len 28 from "router3" 03:22:54: BR0/0:1 CHAP: I CHALLENGE id 79 len 28 from "router1" 03:22:54: BR0/0:1 CHAP: Using alternate hostname router3 03:22:54: BR0/0:1 CHAP: O RESPONSE id 79 len 28 from "router3" 03:22:54: BR0/0:1 CHAP: I SUCCESS id 79 len 4 03:22:54: BR0/0:1 CHAP: I RESPONSE id 74 len 28 from "router1" 03:22:54: BR0/0:1 CHAP: O SUCCESS id 74 len 4 03:22:54: BR0/0:1 PPP: Phase is VIRTUALIZED 03:22:54: Di15 PPP: Phase is UP When I add the dialer remote names on both sides..... 03:25:08: BR0/0:1 LCP: State is Open 03:25:08: BR0/0:1 PPP: Phase is AUTHENTICATING, by both 03:25:08: BR0/0:1 CHAP: Using alternate hostname router3 03:25:08: BR0/0:1 CHAP: O CHALLENGE id 82 len 28 from "router3" 03:25:08: BR0/0:1 CHAP: I CHALLENGE id 87 len 28 from "router1" 03:25:08: BR0/0:1 CHAP: Using alternate hostname router3 03:25:08: BR0/0:1 CHAP: O RESPONSE id 87 len 28 from "router3" 03:25:08: BR0/0:1 CHAP: I SUCCESS id 87 len 4 03:25:36529013660: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 5551234 router1 I guess the reason I am confused, is both routers seem to know the other peers correct hostname and password and they authenticate successfully. Why wont the call proceed? They seem to reach my max-auth of 5 and stop. Thanks in advance, K Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59224&t=59224 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
