Hi, Use debug priority (for LLQ)while simulating and see if u get any info..
-----Original Message----- From: Ivan Yip [mailto:[EMAIL PROTECTED]] Sent: Friday, December 27, 2002 3:28 PM To: [EMAIL PROTECTED] Subject: RE: FR Low Latency Queuing (LLQ) [7:59820] Hi, Thanks your information. My goal is to make sure from certain source ip (eg, voice gateway) to have guaranteed bandwidth under link congestion. Under normal cases, it can up to 128k. Therefore, 'rate-limit' is not my solution. Due to limited resources, pc2 will upload dummy ftp traffic to the server to make the link congested (As the FR is only 128k, so it can be easily get congested). Afterwards, I will upload from PC1 (source ip defined to have LLQ) to test the LLQ. However, the result was not my expected. The traffic from PC1 was not guaranteed. rgds, ivan **************************Disclaimer************************************ Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' and 'confidential' and intended for use only by the individual or entity to which it is addressed. You are notified that any use, copying or dissemination of the information contained in the E-MAIL in any manner whatsoever is strictly prohibited. *************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59828&t=59820 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
