""Bruno Fernandes"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > OK Rookie question > > > I have 2 routers connected with a PPP link (serial) > > Router A in area 0 > Router B in area 20 > > I have several loopback interfaces in Router B area 20 and announced as > area 20, I have configured the loopback interfaces with C class > addresses. But when I issue a show ip route in Router A I think I should > see the network announced with a class C mask but it appears with host > mask. > > I have tried with EIGRP and everything appears to be normal. > > Do I need to summarize in Router A ? > > Any ideas? >
This is the way it is supposed to work. Out of the box, without intervention, loopbacks are considered stub hosts in the OSPF world. The intervention which corrects this is the command ip ospf network point-to-point, a knob that was added in 12.x seemingly for the purpose of giving CCIE Lab candidates a break. ;-> > > Thanks in advance, > BF Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60343&t=60342 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
