I take it, 3 consecutive dots [one per line] does something to ixnay the remainder of an email??
-----Original Message----- From: COULOMBE, TROY Sent: Tuesday, January 07, 2003 5:52 PM To: 'mlehr'; [EMAIL PROTECTED] Subject: RE: Bridging Question? [7:60546] Mike, Well, we have an ATM PVC into the public cloud where the ISP later converts it to Frame, and on our 2600 we take the frame circuit & bridge it... here's a snippet of the configs::: frame-router# interface Serial0/0 description Frame Relay to datacenter no ip address ip directed-broadcast encapsulation frame-relay IETF no ip mroute-cache no fair-queue ! interface Serial0/0.1 point-to-point frame-relay interface-dlci 41 IETF bridge-group 1 interface BVI1 ip address xxx.xxx.125.33 255.255.255.248 and on the ATM interface [in a 6509]::: interface ATM0 atm preferred phy A atm uni-version 4.0 atm pvc 125 2 41 aal5snap atm bind pvc vlan 125 125 no atm auto-configuration atm ilmi-keepalive no atm address-registration -----Original Message----- From: mlehr [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 07, 2003 5:11 PM To: [EMAIL PROTECTED] Subject: Bridging Question? [7:60546] I have studied for and successfully tested CCNA & CCNP and now I am studying for the CCIE written exam. At this point in my studies, I am reading up on the subject of Bridging. I fully understand the concept of bridging when it comes to switches, but I am perplexed as to why a router would need to perform a bridging function. Obviously bridging capabilities are built into the routers IOS but what need would prompted anyone to use this feature. In the other studies Bridging was not a covered subject so this is new territory for me. Help! Mike L. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60558&t=60546 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
