Have you checked the underlying PVC? show frame pvc, debug frame lmi, beat up carrier? I have seen PVCs misconfigured by the carrier so they connected to *somewhere*, so the sub-interface was up... but the PVC wasn't connected to the service it was supposed to be connected to, so not much was usefully happening across the link.
JMcL Mark W. Odette II wrote: > > What about bouncing the 7500... if you did the 2500, and your > problem > wasn't resolved, it might just repair itself by doing the same > to the > 7500 (during a good maintenance window of course :) ) > > And, of course, everything that Chuck said too :) > > -Mark > > -----Original Message----- > From: The Long and Winding Road > [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, January 07, 2003 10:24 PM > To: [EMAIL PROTECTED] > Subject: Re: frame relay stumper [7:60567] > > sanitized configs would help immensely. including other > subinterfaces > that > work as well as the ones that don't. from both sides. > > also, IOS versions, numbers of subinterfaces,etc. > > thanks > > -- > TANSTAAFL > "there ain't no such thing as a free lunch" > > > > > ""Mossburg, Geoff (MAN-Corporate)"" wrote in > message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > How's this for nutty: We have a frame-relay point-to-point > circuit > going > > between our Cisco 7500 core router and a 2500 remote router, > and the > > subinterfaces have IP addys of .1 and .2, respectively. Both > sides' > > subinterfaces are "up/up", but I am not able to ping either IP > address, > even > > when I am on the host router for each address! Both sides > have other > working > > subinterfaces which I have tested similarly, and these use > the same > physical > > circuit, so I know the circuit is good. OH... and this > connection WAS > > working at some point, but I can't tell when it stopped > working, due > to > the > > fact that neither router recognizes that there is a problem. > I tried > > bouncing both subinterfaces and reloading the 2500, but the > problem > remains. > > Any advice about what I may be overlooking would be a Godsend. > > Thanks! > > GM > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60579&t=60567 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
