Priscilla Oppenheimer wrote: > > I wonder if he really meant to ask about clocking?
Good point. Sometimes the CSU is not CPE but rather telco-provided. If you buy a fracitonal service and just stick a router on it on blind faith, you have no idea how many timeslots were activated in the T1/E1. But your FR scenario sounds much more likely. >The language > sounds like he may have meant one or the other of these: > > 1) Bandwidth (capacity), in which case he could ask the > provider (again!?) and, if it's Frame Relay, maybe see the > bandwidth by using the "show frame pvc" command. > > 2) Throughput, in which case it must be measured with tools > like TCP Test (TCPT) and others. > > Priscilla > > > Howard C. Berkowitz wrote: > > > > At 10:59 AM +0000 1/8/03, Marakalas wrote: > > >Hi All, > > > > > >How does one check the clocking that is provided by > > >the telecommunications company to me. I just > > >established that on one of my links in the network, > > >our company has been paying for a 512kb line, and > > >instead the line we're getting is a 128kb. > > > > > >Any assistance in this regard will be highly > > >appreciated. > > > > > >Marakalas > > > > You're going to need a hardware test instrument. Some > > higher-end > > multimeters and wiring testers have frequency counters. You > can > > use a > > standalone frequency/pulse counter. Otherwise, I'd use an > > oscilloscope, with the caveat I know what the pulse train is > > supposed > > to look like. > > > > I am assuming here that you are talking about physical clock > > rate on > > a DSU, not throughput rate. That's a different problem. > > > > > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60655&t=60591 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
