Hi everyone, My question is regarding ODR vs EIGRP. I have about 16 or 17 stub routers that connect back to my core. Some of the remote locations are configured via frame and are (or will) be running VOIP. Another group of remote (but not quite as remote) locations are point-to-point, most with at least 512k of bandwidth. I have one other set of remote locations in Puerto Rico, with a main hub connecting via frame back to corporate and the remotes connecting to the hub via a local wireless service. The PR routers are 805's, most of the others are 1750's or 1760's, with a 3600 at the core.
Right now, everything is running EIGRP, except the stubs in PR which are being upgraded so they can support EIGRP. Is there a better way to configure this? Should I set up all these spoke guys as stubs? If so, I'm a little confused on the different stub options and whether I need to configure those. I was also wondering if ODR might be a better option in PR than EIGRP. Can anyone give me any feedback on this? Will it integrate OK with EIGRP running on the PR hub router? TIA, Kris. ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender by email, delete and destroy this message and its attachments. ********************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=60814&t=60814 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
