To run on an RSP card your AIP must be part number 73-1188-02 Rev D0 or later. How did you get 12.2(15) on an RP card? I thought they maxed out around 11.2.
> -----Original Message----- > From: Nelson Herron [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 15, 2003 10:45 PM > To: [EMAIL PROTECTED] > Subject: RSP7000/AIP gives SNMP-3-BADOID: [7:61175] > > > I have a 7010/RSP7000 (no CI) that seems to run perfectly > well except for > the ATM card. When I plug in the MM cable from the Madge ATM > switch it > starts generating "SNMP-3-BADOID: ATTEMPT TO GENERATE AN > INVALID OBJECT > IDENTIFIER" messages. It is running 12.1(8) boot image and > 12.2(7) IOS with > 128 MB mem. I have two cards that exhibit the same behavior > on the 7010. > On this router the "sh cont cbus" message identifies the Hdwr > as v. 1.03. > Both of these cards work as expected in a 7000 w/ RP running > 12.2.15 from > ROM. On this platform the cards are also identified as Hdwr > 1.30, which is > what I expected. Any suggestions. I would greatly > appreciate the help. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61204&t=61175 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
