quick typo correction : ip on service svc-w2.web2 should be > ip address 10.20.20.11 > port 80 > keepalive type http > keepalive uri "/test.html" > active > ""Sam Sneed"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Lets say I have the following scenario. CSS11152 with ethernet e0 IP address > 192.168.1.1 VLAN outside. I have 2 sets of servers addresses 10.10.10.0/24 > on eth5 VLAN server1 and 10.20.20.20/24 on eth6 VLAN server2. I configure > services as per below. On my content rules can a make a VIP on the > 192.168.1.0 network and on another 192.168.100.0 network. Since VIP is > NAT'ing I am thinking that you do not need a VIP address that has the same > network as any VLAN's on the CSS. Is this true? > > content cnt-www.web1 > balance aca > url "/*" > service svc-w1.web1 > service svc-w2.web1 > vip address 192.168.1.50 > active > > content cnt-www.web1 > balance aca > url "/*" > service svc-w1.web2 > service svc-w2.web2 > vip address 192.168.100.50 > active > > service svc-w1.web1 > ip address 10.10.10.10 > port 80 > keepalive type http > keepalive uri "/test.html" > active > service svc-w2.web1 > ip address 10.10.10.11 > port 80 > keepalive type http > keepalive uri "/test.html" > active > > and > > service svc-w1.web2 > ip address 10.20.20.10 > port 80 > keepalive type http > keepalive uri "/test.html" > active > service svc-w2.web2 > ip address 10.10.20.11 > port 80 > keepalive type http > keepalive uri "/test.html" > active
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61230&t=61229 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
