Solved my own problem - see CSCdu43762 on the CCO. Shows up with the 7200
and an NSE-1 and (evidently though they are not listed) the 1760, 2621,
2621XM, 2611 and 1720. Solution is to turn off PXF (rate limiting of ICMP
unreachables) using: no ip icmp rate unreach
Lesson learned? Read everything... :)
Bill
-----Original Message-----
From: William Pearch
Sent: Thu 1/16/2003 8:12 PM
To: William Pearch; [EMAIL PROTECTED]
Cc:
Subject: Traceroute troubles
Why does traceroute seem to have problems with the second check of a final
hop?
RouterA-----RouterB
When trace from routerA loopback to routerB loopback, first one comes back
fine, second is a * and third is fine. Seems wierd - 500 pings all go swell.
Then to top it off... RouterA trace to RouterA loopback0, first one comes
back fine, second is a * and third is fine. 500 pings all go swell.
I've tried over ethernet, fast ethernet, serial (HDSL and frame relay).
Same behavior on my 2600's and 1700's. All running 12.2.13T. I wasn't
able to find anything on the CCO this evening.
Thoughts?
Bill Pearch, Anchorage
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61247&t=61247
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
